If you are in need of a reach-in latch with powerful magnetic force, you've come to the right place. The 0171 latch offers four handle style in locking and non locking models. The 'breaker action' quickly releases the magnet for fast door opening. The two-way adjustment adapts each latch for changing door alignment while the adjustable latch body compensates for gasket wear. The strike adjusts vertically to accommodate door sag on locking models.
Above, you'll have the option to select one of the following:
Straight die-cast latch, no lock, polished chrome - Part# 10171000004
Measurements: 1-1/8" x 11-1/2" x 2"
Straight die-cast latch, with lock, polished chrome - Part# 10171C00004
Measurements: 1-1/8" x 11-1/2" x 2"
Offset die-cast, no lock, polished chrome - Part# 10171B00024
Measurements: 1-1/8" x 11-1/2" x 2"
Offset die-cast, with lock, polished chrome- Part# 10171BC0024
Measurements: 1-1/8" x 11-1/2" x 2"
Specifications Made of high pressure die-cast zinc body and adjustment plate, zinc die-cast handle, one piece steel strike Nitrile magnet has the holding force of approximately 50 lbs Latch is edge mounted, strike is surface mounted Drilled and countersunk for #10 screws. Strike included We carry a large selection of commercial kitchen equipment hardware parts.
If this reach in latch isn't what you need, take a look at some of our other latches and strikes available today!
