Loading... Please wait...
- Home
- Hardware
- Hold-opens
- 02-14649-0001 Anthony Hold Open Arm and Hardware
02-14649-0001 Anthony Hold Open Arm and Hardware Description
Warranty Information
| Part # | 02-14649-0001 |
Reviews
Related Food Service Equipment
and Accessories
Texture
-
Smooth
The most versatile PVC material.
-
Ribbed
Very durable. Minimizes scratches, and prolongs visibility.
Hardware (Mounting Bar)
-
QuickMount
This lightweight, durable and easy to install ''QuickMount'' replacement strip curtain hardware holds strips tightly in place preventing accidental removal. This bracket comes in 2 FT lengths. Used primarily for 6" wide strips.
-
Metal EZ Mount
This 8 FT aluminum mounting bracket is used for easy mount of 6" or 8" wide smooth strips. Also referred to as a "G-Bar" this bracket allows strips to slide in and hold in place. Strips have 7/8" shoulders with the tops tabbed for easy slide-in installation.
-
Plastic EZ Mount
The most popular bracket sold. This 8 FT plastic bracket can easily be cut down based on the width of the door. Used for easy mount of 6" or 8" wide smooth strips. Also referred to as a "G-Bar" this bracket allows strips to slide in and hold in place. Strips have 7/8" shoulders with the tops tabbed for easy slide-in installation.
-
Universal Mount
The durable, versatile EconoTrack bracket can be used for both surface and in-jamb mounting on small or very large openings. EconoTrack's formed steel face plate holds strips firmly while allowing flex without breaking. These rugged brackets are constructed with 14 gauge galvanized steel with 1/4" studs. Face plates are formed in 12" sections for easy strip replacement. Comes in 3, 4, or 5 FT lengths, with the option to mount to the ceiling or the wall.
-
Wall Mount
Same style as the Universal Mount, but with the option to only mount to the wall. Used for heavy duty applications. All cooler/freezer strip options work on this bracket. Available in 3, 4, or 5 FT lengths.
Hardware - Mounting Bar
-
Universal Mount
The durable, versatile EconoTrack bracket can be used for both surface and in-jamb mounting on small or very large openings. EconoTrack's formed steel face plate holds strips firmly while allowing flex without breaking. These rugged brackets are constructed with 14 gauge galvanized steel with 1/4" studs. Face plates are formed in 12" sections for easy strip replacement. Comes in 3, 4, or 5 FT lengths, with the option to mount to the ceiling or the wall.
-
Wall Mount
Same style as the Universal Mount, but with the option to only mount to the wall. Used for heavy duty applications. All cooler/freezer strip options work on this bracket. Available in 3, 4, or 5 FT lengths.
Edge Options
-
Standard
The most popular, the edges of the board are square and have been finshed (deburred) so they are safe to handle.
-
Bullnose
We will round the edges so they are not square, often referred to as rounded.
-
Unfinished (Saw Cut)
Not very common, this is just like it says. No finishing, edges are sharp. Typically people use this option in custom applications.
Corner Options
-
Standard
The most popular, the corners are square (90 degrees) and have been finshed so they are safe to handle.
-
Rounded
The corners are rounded at about a 1/2" radius. Typically people will round the corners if they walk past the board often in a commercial kitchen.
-
Unfinished (Saw Cut)
Not very common, there is no finishing and the corner is sharp.
Juice Grooves
-
Also commonly referred to as juice troughs, juice grooves are one of our most requested customizations. We simply route a small trough around the perimeter of your board to catch drippings from carving meat.
<
